Regular maintenance methods of bearing the sphere
Date:2012-01-11 9:31:06
In the period of down to improve change bearing than because of bearing the selected into battle damage the shutdown losses more economical passed
First, we have to raid the lubricant lubricating bearing is very important, not only is aimed at TIMKEN bearing, but for all the bearing but please pay attention, and the spherical shoulds not be too much grease and bearing on bearing the lubricant raid essentials is: with little lubricant in between two fingers friction, if has the pollutant exists, is can the feelings; Or in hand back with a layer of lubricant, then hold sealing light and then change TIMKEN bearing raid is the use of lubrication oil lubricant used engine oil bearing in diarrhea, if can of words, just into the fresh oil again and let inflexible in low speed rotation as a few minutes to collect the residual oil about pollutant, and then spilled oil besides these note: better make use of oil in DianMo filter and use of bearing grease lubrication slippery slide in change fat, used in device should stop Joe with cotton content access to any part of the bearing because these traces of fiber in turn piece about wedge between and damage it, especially the application of small bearing more need to be aware of this problem
Bearings cleaning
Seal of the bearing grease, sealing ring, or dust cover damage clearly
Remove bearing inspection, the first record bearing the appearance, confirm the lubricant stock, sampling the lubricant with after the raid, wash bearing as a cleaner, common use gasoline, flame like the tear open come down to the sphere of bearings cleaning, coarse and fine fine points cleaning wash, takes in a container, first put on the bottom of the metal net, bearing not directly dirt fine cleaning war vessel, if make TIMKEN bearing with dirt rotation, will damage the bearing drive face, should be in the thick cleaning oil, use brush clear remove grease and adhesive content, generally after cleaning, into the fine cleaning
Because of the heat and cause of discoloration clearly
Second, will need to keep an eye on is surrounded by the open bearing raid bearing, must not let TIMKEN bearing naked in pollutants or moisture of continuous if things, should with oil film or identical with the material was inflexible in it and remove if the scene about executive raid under no masking the sphere of cleaning of the bearing, to apply to the brush with with oil solvents washing, again with a piece of cloth wipe not burr or use compressed atmosphere blow dry (careful not to let bearing component starting rotation) to a small mirror and resemble the kind of probe used the dentist to raid the bearing surface, keep track, and not block or cleaning encryption beads of dustproof bearing; Wipe the external appearance can only if a scene that damaged when bearing to change off first, spindle bearing the FangDing in operation, to fully guarantee the lubrication, and according to the actual condition add lubricant use on a regular basis, not long time broken oil so, to the user corporations, should choose better and more appropriate spindle oil new special DingZiYou can improve the lubrication performance and extend oil cycle, extend the spindle and the service life of the bearings, also has good rust and corrosion properties
Second, the enhancement of nylon material maintains a TIMKEN bearing, using temperature should be less than 120 ℃, it is strictly prohibited to cooking oil to clean
In addition, spindle maintenance cleaning should pay attention to the method and prevent damage to scratch the surface, and try to remove roller bearing parts of the residue, should use washing, suction pieces of feet more than the method of internal cleaning oil is preferred to pay attention to avoid the dumping of type and make cleaning rubbish residual accumulation in TIMKEN bearing parts, lead to the sphere bearing produce noise, wear, failure