Solutions
Brand List
Bearing damage and Solutions
Cracking
Date:2011-08-06 9:18:30
|
Condition |
Cause |
Solution |
|
Splits, and cracks in bearing rings and, rolling elements. |
Excessive load Excessive impacts Overheating by creeping and rapid cooling Very loose fit Largo flaking |
1. Examination and improvement of cause of very large load 2. Prevention of creep 3. Correction of fit |
- Photo 3
- Inner ring of spherical roller bearing
- Split of raceway surface in the axial direction
- The cause is excessive interference fit.
- Fracture of inner ring shown in Photo 3
- Originating point is observed at the middle of the left raceway surface.
- Outer ring of four-row cylindrical roller bearing
- Split of raceway surface in the circumferential direction, originated from large flaking.
- The cause is large flaking.
- Outer ring of angular contact ball bearing
- Split of raceway surface in the circumferential direction
- The cause is slipping of balls due to poor lubrication.
